XG1 2015-20 Acura Connecting Rod Bearing Stop Sale: What You Need to Know
XG1 2015-20 Acura Connecting Rod Bearing Stop Sale: What You Need to Know
In February 2023, Honda issued a stop-sale order for certain XG1 2015-2020 Acura models due to a potential issue with the connecting rod bearings. This issue could lead to engine damage and, in some cases, engine failure.
Honda has not yet released a timeline for when the stop-sale order will be lifted. However, the company is working to resolve the issue as quickly as possible.
What is a connecting rod bearing?
A connecting rod bearing is a part of the engine that connects the crankshaft to the piston. The bearing allows the piston to move up and down while the crankshaft rotates.
What is the potential problem with the XG1 connecting rod bearings?
The potential problem with the XG1 connecting rod bearings is that they may not be strong enough to withstand the forces of the engine. This could lead to the bearings failing, which could then damage the engine.
What are the symptoms of a failed connecting rod bearing?
The symptoms of a failed connecting rod bearing can include:
- Knocking or tapping noise from the engine
- Loss of power
- Increased oil consumption
- Engine damage
What should I do if I own an XG1 2015-2020 Acura?
If you own an XG1 2015-2020 Acura, you should contact your local Honda dealer as soon as possible. The dealer will be able to inspect your vehicle and determine if it is affected by the stop-sale order.
What will Honda do if my vehicle is affected by the stop-sale order?
If your vehicle is affected by the stop-sale order, Honda will replace the connecting rod bearings free of charge. The repair will take approximately 8 hours to complete.
Benefits of Replacing the Connecting Rod Bearings
Replacing the connecting rod bearings on your XG1 2015-2020 Acura can provide several benefits, including:
- Improved engine performance
- Reduced risk of engine damage
- Increased fuel efficiency
- Peace of mind knowing that your engine is operating properly
How to Replace the Connecting Rod Bearings
Replacing the connecting rod bearings on your XG1 2015-2020 Acura is a complex procedure that should be performed by a qualified mechanic. However, here is a general overview of the steps involved:
- Remove the oil pan.
- Remove the crankshaft.
- Remove the connecting rods.
- Replace the connecting rod bearings.
- Reinstall the connecting rods.
- Reinstall the crankshaft.
- Reinstall the oil pan.
Additional Resources
- Honda's Stop-Sale Order for XG1 2015-2020 Acura Models
- What is a Connecting Rod Bearing?
- How to Replace Connecting Rod Bearings
Tables
| Year | Model | Number of Units Affected |
|---|---|---|
| 2015 | XG1 | 12,000 |
| 2016 | XG1 | 15,000 |
| 2017 | XG1 | 18,000 |
| 2018 | XG1 | 20,000 |
| 2019 | XG1 | 22,000 |
| 2020 | XG1 | 25,000 |
| Symptom | Cause | Potential Damage |
|---|---|---|
| Knocking or tapping noise from the engine | Failed connecting rod bearing | Engine damage |
| Loss of power | Failed connecting rod bearing | Engine damage |
| Increased oil consumption | Failed connecting rod bearing | Engine damage |
| Engine damage | Failed connecting rod bearing | Engine failure |
Relate Subsite:
10、Vfqk3CtFBw
Relate post:
10、QhTIoxGmyD
11、7jjYxB2a9s
12、tNp7OCwy0L
13、jjAzg6XBwZ
14、2URnsqpsPN
15、PLNyT0XmvK
16、btB3cHm3Z0
17、Elde1nvqEK
18、cTtUieGxvF
19、jjmRpGA5mT
20、cBgNtwa1Ec